Home life is hard on walls; from kids’ games to furniture movers, there are a thousand ways to dent, gouge, crack, and put holes through plaster and drywall. To repair a large hole you’ll need additional tools like a ruler, a wallboard saw, and something to use as a patch. Our drywall repair company will protect your Kansas City, Olathe or Shawnee home against this kind of destruction. Scrape away any loose compound, and use a razor knife or drywall saw to expand the crack through the wall surface into the stud cavity (image 3). Avoid removing solid, well-adhered compound beyond the crack itself.
Score the back of the drywall with a box cutter or knife about an inch from each side. When the taping job is complete, sand the patch smooth and finish the area to match the surroundings. The next thing you need to do is cut a piece of 1×2 or 1×4 the length of the inside of the hole you just made and screw the pieces on the inside of the wall to the drywall for reinforcement.
Call Jim 919-542-5336 Drywall finishers providing professional repair service in Cary, NC. Orange peel texture on walls or ceilings is nice for hiding defects and adding interest, but it can be a real pain if you have to make a big patch. All of your pesky drywall dings, scratches, holes, and gouges, can be repaired or skim coated for walls that look like new.
Using a straight edge and pencil, mark a square slightly larger than the damaged drywall hole. You can pick up a 2′ x 2′ piece of drywall at your local home improvement store; it’ll be large enough for most repairs but won’t leave behind a lot of unused drywall material.
Although you could use paper drywall joint tape and drywall mud , the repair is easier using a fiberglass mesh adhesive-backed joint tape. Next remove the old drywall that you just cut, make sure there are no pieces of drywall still stuck to any wood studs, if so then remove it using a 5 in 1 painters tool or a flat head screw driver.